Remote Controlled Metal Detecting Robot with Remote Image Transmission (Electronics Project)

Path Finder was sent to Mars in 1998. This was achievement a great which detected the secrets of “Mars”. This project deals with RF controlled robot and it is a prototype for the “Path Finder”.

The robot is controlled by a RF remote. It can be moved forward and reverse direction using geared motors of 60RPM. It can also take sharp turnings towards left and right directions. This project uses AT89S52 MCU as its controller. A high sensitive induction type metal detector is designed using colpitts oscillator principle and fixed to this robot. Also a wireless camera with voice is interfaced to the kit.

When the robot is moving on a surface, the system produces a beep sound when metal is detected. This beep sound will be transmitted to remote place. Simultaneously the images around the robot will be transmitted to remote place. User can monitor the images and metal detection alarms on Television.

The RF modules used here are STT-433 MHz Transmitter, STR-433 MHz Receiver, HT640 RF Encoder an HT648 RF Decoder. he three switches are interfaced to the RF transmitter through RF Encoder. The encoder continuously reads the status of the switches, passes the data to the RF transmitter and the transmitter transmits the data. This project uses 9V battery. This project is much useful for mines detection and surveillance applications.

Download Remote Controlled Metal Detecting Robot with Remote Image Transmission Project

>> 100+ Projects on Image Processing

Leave a Reply

Your email address will not be published. Required fields are marked *

5 × = forty five