Separate Treatment of Wash Water From Sand Filter Using Disc Filter Technology (Civil Project)

The purpose of this study is to evaluate the convenience and effectiveness of using a disc filter to treat washing water from the sand filters at Sundet wastewater treatment plant. The disc filter is used aiming for the reduction of suspended solids and phosphorus. The study was divided in two main experimental stages.

During the first stage laboratory jar-tests were performed in order to identify which flocculation aid was more suitable, this was further on used to improve the water treatment. Based on the laboratory trials results, two different polymers (1 and 2) were chosen to be tested at pilot scale.

The second stage involved the pilot filter operation itself; this period was as well divided in two sub-stages where filter cloths with two different pore openings were tested. During the first sub-stage the pilot operated with an 18 μm pore opening filters cloth and both polymers. At the end of the first half polymer 1 showed to be more efficient and so it was further used throughout the second sub-stage in combination with a 10μm pore opening filter cloth.

As from theoretical knowledge the phosphorus and suspended solid removal were expected to be between 75% and 90%, results which were achieved during both laboratory trials and pilot filter. The best results were observed with the 10μm pore opening filter cloth and polymer 1. Also, additional results from pilot trials performed at Sundet after the study period are presented.
Source: KTH
Authors: González Sánchez | María Fernanda

Download Project


Leave a Reply

Your email address will not be published. Required fields are marked *

÷ 1 = two